Automotive LCD is widely used in industrial control, medical, education, and other terminal industries with its advantages of fast response, easy communication, durability, and space-saving. People tap the screen with their fingertips or a stylus to get the corresponding information. It makes the operation of the computer completely locked on the screen, without a keyboard and mouse, safe and reliable, and will not affect the operation of the system because of the user's operation.
With automotive LCD, no matter where you go to work when encountering an all-in-one touch query machine, you only need to touch the screen with your finger, and the information you need can be presented in front of your eyes. If all the places where we need to ask or consult are equipped with a touch inquiry machine, it will provide infinite convenience for our life and work. So how do we extend the lifespan of automotive LCDs?
The automotive LCD part is made of glass, and the edges and corners of the glass are relatively sharp. Gloves/finger cots are required for assembly. The automotive LCD part is a fragile glass product. Do not apply a strong impact to the touch screen during assembly.
The automotive LCD film surface is the touch surface, that is, the front of the product; the glass surface is the non-touch surface, that is, the back of the product. Avoid picking up the lead wires directly to pick up the automotive LCD, and avoid pulling the lead wires. No bending action can be performed on the part of the lead wire reinforcement plate. Any part of the lead wire is not allowed to be folded in half. When assembling, the lead wire must be inserted horizontally, and cannot be inserted in half at the root of the reinforcing plate.
When picking and placing the automotive LCD, it needs to be operated on a single chip and handled with care to avoid the products colliding with each other and scratching the surface of the product. When cleaning the surface of the product, please wipe with a soft cloth (deerskin) dipped in petroleum ether. Do not stack automotive LCDs, use trays. A final note: Do not use corrosive organic solvents to wipe the surface of the automotive LCD film. Such as industrial alcohol, etc.
Technology has brought convenience to our life and work. We must cherish such achievements, and learn to maintain them while enjoying convenience. When using industrial touch screens, pay attention to minimizing the loss of products and prolonging the service life of products...